Yiimp pool install ubuntu guide 16.04 server and setup Elicoin

Many were asked to write more detailed instructions on how to install the pool on yiimp

So I wrote — how to install a pool for a fresh ELICOIN coin (by analogy it is possible to raise a pool for any other cryptonometes).

Let’s start. First of all we register ourselves VDS server.


You can rent a server, but for the first time you can use a simple virtual server from sprintbox.

Check in. Just fill out the form — write your mail.

We received a letter with a link to the activation, we will activate it.

Create a box with a tariff ubuntu1604-32gb-2gb-1core

The mail came with data with an ip address of the box and a password from root, connect to it via the PuTTY program

Immediately after connecting, the system asks you to update the password. We write the old password and 2 times a new one and be sure to remember it.

Installing the MC file manager

We write

Run it with the MC command

Go to the root folder and press Ctrl + O to execute commands

 Download and install the wallet ELICOIN

Let’s start elicoin wallet

On F10 we leave mc and the purse process ends.

Now you need to configure the wallet, go to the /root/.elicoin/ folder and create the elicoin.conf file

Create a file with the command touch elicoin.conf and write there:

We save the file and start elicoind again and see the inscription «Elicoin server starting», it means everything is OK, the purse is started and the synchronization is in progress.

Next, proceed to install the yiimp pool

Downloading the yiimp installation file

Run the installation script with the command

The installation wizard will ask us questions about what and how to install:

We write the time zone — Europe/Amsterdam

Specify — The name of the server or its ip if access is without a domain

Will there be a subdomain — no answer

Point — Mail box for letters

If you use auto-exchange, then indicate BTC wallet

The control panel address (any not standard, so that villains did not pick up passwords, will be site_name / site / panel_name)

Ip address from which access to the control panel will be allowed (see whatismyip.com)

Specify — Do you want to install an auto-link?

Configure the UFW firewall to standard ports — yes or no

Do you want to install a secure SSL certificate for a domain? — yes or no

Next comes the automatic installation….  Waiting…

 

We resolve the port to connect to 6333 (this is the stratum port for our algorithm)

instead of 6333 we write the port on which we will have a stratum

Run the pool files:

Now we need to create a coin on the yiimp site of the installed pool, for this we go to the admin area

123.123.123.123/site/paneladress (Instead of paneladress, we enter something that was specified during the installation, when we were asked the address of the panel)

Adding a new coin to the address - 123.123.123.123/coin/create

on images — Instead of WAVI we write ELICOIN

Algo to yescryptR16

RPC PORT - 9994

The coin appeared in the list, open its settings

On the Daemon tab we fill in the login, password and port from the wallet (we wrote them to the file elicoin.conf)

Again, on the Daemon tab at the bottom of the page you can see the lines that you need to add to the wallet configuration (wavi.conf)

In total we made a pool for yiimp for the coin ELICOIN, by analogy it can be done for any other cryptomaniac. Also configure that when the server starts everything is automatically started and in the crown it is restarted every few hours and that the backup copy of the database is sent to the cloud or to the mail, but this is another story.

 please donate to Elicoin: EHHooM1nvHj7VTTwRWTMzvFrmALdjMyN8r

2 thoughts on “Yiimp pool install ubuntu guide 16.04 server and setup Elicoin

  • 13.10.2018 at 08:35
    Permalink

    hello buba,
    how to make stratum starting diff 0.01 works?
    thanks

    Reply
    • 25.02.2019 at 09:44
      Permalink

      Yiimp does not support DIFF less than 1 by algorithm yescryptr16

      Reply

Добавить комментарий для 0xcitchx Отменить ответ

Ваш e-mail не будет опубликован. Обязательные поля помечены *

*

Можно использовать следующие HTML-теги и атрибуты: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code class="" title="" data-url=""> <del datetime=""> <em> <i> <q cite=""> <strike> <strong> <pre class="" title="" data-url=""> <span class="" title="" data-url="">